1. Attach magnetic handles

• Proline stamps use magnets so handles snap into place quickly.
• Attach handles securely before placing stamps—don’t try to adjust mid-press.

2. Start stamping (layout matters)

• Begin at one edge (usually a straight reference like a wall or form).
• Place the first stamp carefully—this sets your alignment for everything else.
• Add adjacent stamps tightly to avoid gaps or visible seams.

3. Press the stamps

• Use a tamper or your weight to press evenly across the stamp.
• Don’t just step in the center—work the entire surface for consistent depth.
• Lift stamps straight up to avoid smearing the pattern.

4. Continue across the slab

• Move in a consistent pattern (row by row).
• Rotate stamp patterns if they’re designed for variation (prevents repetition).
• Keep checking alignment—small errors compound fast.

5. Detail edges and tight spots

• Use smaller “touch-up” or floppy stamps along edges, corners, and obstacles.
• Hand tools can refine joints or textures if needed.

6. Let the concrete cure

• Don’t disturb the surface once stamping is complete.
• Let it set according to your mix and weather conditions (usually 24+ hours).

7. Clean and seal

• Wash off excess release agent after curing.
• Apply a concrete sealer to protect the surface and enhance color.

 Common mistakes to avoid

• Stamping too early → stamps sink too deep or blur
• Stamping too late → weak or incomplete impressions
• Uneven pressure → inconsistent texture
• Poor alignment → obvious pattern seams

 Pro tips

• Test your timing on a small section first.
• Work with at least one helper—stamping is time-sensitive.
• Keep stamps clean during use to maintain crisp detail.
• Plan your exit path so you don’t step on finished areas.