Step 1 mixing: to mix pull out and open bag of EZ-Tique powder, fill the 1 gall pail with water and mix in one full three-quarter cup scoop of the powder. Use more or less of the product in one gallon of water to achieve different results in the color intensity. EZ-Tique can be mixed readily with a stir stick so motorized mixing is not necessary but product container will need to be agitated periodically during application to keep the solids from setting. This setting property of EZ-Tique is important in reaching the desired antique effect. 

Step 2 before Appling: Before applying product to unsealed concrete it is helpful to pre-moisten the surface with water so the liquids color will have time to even out out and settle properly. 

Step 3 applying: The most basic technique to apply EZ-Tique is to simply pour the liquid color straight onto the horizontal concrete surface with a standard garden watering can, making sure to leave a uniform coat of liquid over the area to be covered. If necessary, liquid EZ-Tique can be spread quickly and easily with with a CLEAN push broom. Be sure to have clean water handy to spray on the surface to make sure the color spreads uniformly. EZ-Tique can be cleaned up readily with water while it is still wet an can be wiped off with a clean dry sponge when dry.